• The largest diameter bungee cord you can use on the spool and original push pole holders is 3/16th. The guide style holders can accommodate slightly larger bungee cord.

Email us at VMarineLLC@gmail.com

• We recommend using 316 stainless steel 3/8″- 16 thread bolt to attach the V Marine Poling Platform Holder to the lid of your poling platform.  The length of the bolt can vary depending on how the holder is attached to the boat.  The most commonly used lengths are 1 inch, 1 ¼ inch and 1 ½ inch. 
• We also recommend that you use a washer along with the bolt to help spread out the load created by the holder on the lid of your Poling Platform. We recommend using medium Loctite on the bolt or locking washer to help ensure the bolt does not rattle out.  Be aware the Poling Platform Holders are not designed to stake your boat out.

• Our standard cup Poling Platform Holder is designed to hold must standard size push poles.  Currently the only push pole we are aware of that our Poling Platform Holder cup does not hold is the Stiffy Extreme or Small diameter Marquesa Marine Push Pole.  All other Push Poles should fit in the cup of our Poling Platform Holder.
• Our small diameter cup is designed to fit the Stiffy extreme Push Pole and the Marquesa Marine small diameter push pole.

• If you have any questions please email us at VMarineLLC@gmail.com prior to placing the order and we will help you out which what cap to order.

• The top as well as the base plate of the V Marine Push Pole Holders are made of a coated aluminum.  The quick-detach bolt attached to the top portion of the V Marine Push Pole Holders are made of stainless steel.

• The small V Marine Push Pole Holder base plate is 1.50 inches across and .25 inches tall.

• The overall height of the V Marine Push Pole Holder is 2.25 inches.

• We recommend using #10 - #12 stainless steel screws/bolts to attach the V Marine Push Pole Holders base plate to the deck of your boat. We recommend bolting the base plate to the deck of your boat for added strength.